Opera Consonance PM-8
Previo de phono MM/MC de estado sólido
In the PM8 each preamplifier is independently configurable via a series of DIP switches that control gain and resistance. An additional DIP switch acts as a "rumble filter" to allow you to limit low-frequency response to 2Hz or 20Hz. Three DIP switches allow loading to be adjusted from 24 ohms to 1k ohm for moving-coil (MC) cartridges; and, for moving-magnet (MM) types, 47k ohms in unbalanced mode . There are switch positions for values of 24,130,150, 1k, and 47k ohms.
Capacitance adjustment for M Ms is limited: 100 pF . A Three-switch DIP-switch array offers gains of 80, 150, 775, 850, 1300, 1400, 1900, 2000 times.
The heart of the PM8 is a super-quiet analog device microphone preamp based on op-amps. After the adjustable linear gain stage, the signal passes through a passive low-pass RIAA filter and the low-frequency cutoff switch, followed by active RIAA equalization. The low-impedance unbalanced signal can then be output directly.
Especificaciones:
Control de funciones |
Conmutador Of/Off |
Distorsión armónica |
0,001% (para salida de 2V RMS) |
Interfaz de salida |
1 par estéreo RCA |
Interfaz de entrada |
1 par estéreo RCA |
Interfaz de tierra |
1 conexión |
Relación señal/ruido |
96 dB |
Consumo |
20 W |
Dimensiones |
25,5 cm (ancho) x 9,5 cm (alto) x 29,5 cm (fondo) |
Peso |
9 kg |